Epson WorkForce WF-2760 Wireless Printer Setup



Epson WorkForce WF-2760 Wireless Printer Setup and Review

Setting up a Epson WorkForce WF-2760 Printer Wi-Fi Network Using the Control Panel

You can set up a Wi-Fi network for Epson WorkForce WF-2760 printer by using the Epson WorkForce WF-2760 printer’s control panel.

Using the Epson WorkForce WF-2760 Wi-Fi Setup Wizard with LCD panel

If Epson WorkForce WF-2760 printer has an LCD panel, you can use the Epson WorkForce WF-2760 Wi-Fi Setup Wizard to simplify manual setup.
Note:
  1. Epson WorkForce WF-2760 Wifi Setup is not offered for all Epson printers or might not be made it possible for.
  2. Make certain that the Wi-Fi is made it possible for on your computer system beforehand.
  3. Check the SSID and password for your network as these are needed throughout Wi-Fi setup. If you do unknown the SSID and password, check with your network administrator.
  4. For step by step details on Epson WorkForce WF-2760 Setup a Wi-Fi connection utilizing the Wi-Fi Setup Wizard,See below for more Setup. This function is not offered for all printers or might not be made it possible for.



Select your SSID. The SSID is the name of your Wi-Fi network (for example, "My_home's WiFi").
The list is sorted by signal strength.
Select your Wi-Fi Network (SSID), & then press OK. Select Next to continue.

Select the (LINK) What is SSID? if you do not know your SSID.

Enter the password (passphrase or WEP key) for your SSID.
This screen is a virtual keyboard. Use the arrow keys on the control panel to select each character and press OK to enter each character in your password. Select DONE & then press OK to confirm.

IMPORTANT: The Security Key is case sensitive.
Your security key may contain uppercase & lowercase letters as well as numbers.


Select Next to continue.

Using the virtual keyboard
 ↔ Changes to upper case, lower case, or symbols.

 ↔ Moves the cursor to the left and right.

↔ Deletes a character to the left of the cursor (Backspace).

 ↔ Enters a space.

↔Finishes entering characters on the virtual keyboard.



Check the information on the screen shown above. If everything is correct, press OK. The Password is hidden for security purposes.
If you want to check this information again, press .

If this screen is displayed, select Yes, & then Select OK. Select Next to continue.

It may take a few minutes while the Epson WorkForce WF-2760 printer connects to the network.Select Next to continue.
When this screen is displayed, the Epson WorkForce WF-2760 Wi-Fi setup is complete. Select No, & then press OK to finish Epson WorkForce WF-2760 Wi-Fi setup. If you want to Epson WorkForce WF-2760 print a network connection check report, load plain paper in the Epson WorkForce WF-2760 printer, select Yes, & then press OK. For details on loading paper, see your documentation. Select Next to continue.


Press to return to the Home screen.

Make sure one of the following Wi-Fi status icons is displayed in the upper-right corner of the LCD screen.


(Infrastructure mode), (Ad Hoc mode)
It may take a few minutes for the icon to be displayed.

To use the Epson WorkForce WF-2760 printer via Wi-Fi you need to make sure that a Epson WorkForce WF-2760 Wi-Fi connection is setup on your computer/PC/Dekstop/Laptop/notebook.

Epson WorkForce WF-2760 Wifi Printer Setup and Review

Enter WPS Push Button Epson WorkForce WF-2760 Setup Wizard

The printer supports the WPS push button technique and the WPS PIN code approach.

Prior to connecting the printer to the network, check that the access point supports the WPS function.

Note:
  • Make sure that the Wi-Fi is made it possible for on your computer beforehand.
  • For information on the gain access to point WPS function or troubleshooting, see the gain access to point's user's guide.
  • If the access point (wireless router) is not found within approximately 2 minutes, an error message is shown. In that case, make sure the gain access to point is running, & then make the Epson WorkForce WF-2760 WPS settings again from the beginning.
  • For step by step information on establishing a Wi-Fi connection using the Epson WorkForce WF-2760 WPS setup, Select the following link. This function is not available for all Epson WorkForce WF-2760 Wifi printers or might not be made it possible for.
Hpw to Enter WPS Push Button Setup Wizard for Epson WorkForce WF-2760 printerEpson WorkForce WF-2760 Enter WPS Push Button Setup Wizard
If your router (access point) is compatible with WPS, press the WPS push button on the router (access point), or if there is no button on the router, Select the button in your router software settings utility, and then press ok. Select Next to continue.
  If this screen is displayed, select Yes, & then Select OK. Select Next to continue.
 It may take a few minutes while the Epson WorkForce WF-2760 printer connects to the network. Select Next to continue.

When this screen is displayed, the Epson WorkForce WF-2760 Wi-Fi setup is complete. Press OK to finish Epson WorkForce WF-2760 Wi-Fi setup. Select Next to continue.
If a Warning screen is displayed, Epson WorkForce WF-2760 Wi-Fi setup failed.
Press OK & then try Epson WorkForce WF-2760 WPS setup again from step 2.

Check the following items.  
  1. Check that the access point is turned on. If it is turned off, turn it on & then perform Epson WorkForce WF-2760 network setup again.
  2. Place your Epson WorkForce WF-2760 printer close to the access point.
  3. Check that the Wi-Fi communication mode (IEEE802.11*) set for your access point matches the one supported by Epson WorkForce WF-2760 printer. (*Display varies according to your location.)
  4. If the MAC address filtering function is enabled, register your printer's MAC address to prevent Epson WorkForce WF-2760 printer from being filtered.
  5. Check whether or not the DHCP function for the access point is enabled. If it is disabled, change it to enabled.
Press ↑ to return to the Home screen.
Make sure the following Epson WorkForce WF-2760 Wi-Fi status icon is displayed in the upper-right corner of the LCD screen. It may take a few minutes for the icon to be displayed.

To use the Epson WorkForce WF-2760 printer via Wi-Fi you need to make sure that a Epson WorkForce WF-2760 Wi-Fi connection is setup on your compute




Epson WorkForce WF-2760 Enter WPS Pin Code Setup Wizard 


Using the router's setting utility on your computer/PC/Laptop/Dekstop/Notebook, enter the WPS PIN code that is displayed on the Epson WorkForce WF-2760 printer's LCD panel into your router (access point), & then press OK. Select Next to continue. 

If this screen is displayed, select Yes, & then press OK. Select Next to continue.
It may take a few minutes while the Epson WorkForce WF-2760 printer connects to the network. Select Next to continue.

When this screen is displayed, the Epson WorkForce WF-2760 Wi-Fi setup is complete. Press OK to finish Wi-Fi setup. Select Next to continue.
If the following screen or a Warning screen is displayed, Epson WorkForce WF-2760 Wi-Fi setup failed.

Select OK & then try Epson WorkForce WF-2760 WPS setup again from step 2.


Check the following items.
  1. Examine that the PIN code is gotten in correctly in the access point energy.
  2. Check that the gain access to point is switched on. If it is turned off, turn it on and after that carry out network setup once again.
  3. Position your printer near to the gain access to point.
  4. Examine that the Wi-Fi communication mode (IEEE802.11 *) set for your gain access to point matches the one supported by your printer. (* Show varies according to your area.).
  5. If the MAC address filtering function is enabled, register your printer's MAC address to prevent your printer from being filtered.
  6. Inspect whether or not the DHCP function for the access point is allowed. If it is handicapped, alter it to made it possible for.

Press ↑ to go back to the Home screen.
Make certain the following Epson WorkForce WF-2760 Wi-Fi status icon is shown in the upper-right corner of the LCD screen. It might take a few minutes for the icon to be displayed.

 Making General Network Settings with LCD panel

You can Epson WorkForce WF-2760 set up general network settings for your Epson WorkForce WF-2760 printer using the Epson WorkForce WF-2760 printer’s control panel.
Note:
This feature is not available for all Epson printers or may not be enabled.
This Epson WorkForce WF-2760 setting, and the DNS server/Proxy server address setting, is not available for all Epsn printers or may not be enabled.
  • Turn on the Epson WorkForce WF-2760 printer.
  • Enter the Epson WorkForce WF-2760 Setup mode.
  • Select Epson WorkForce WF-2760 Network Settings (or Epson WorkForce WF-2760 Wi-Fi Settings).
  • Select General Epson WorkForce WF-2760 Network Setup (or Epson WorkForce WF-2760 Manual Wi-Fi Setup).
  • Confirm the Epson WorkForce WF-2760 printer name and modify it if you want.
  • The Epson WorkForce WF-2760 printer name is used to access or identify the Epson WorkForce WF-2760  printer on the network.
Note:
The default Epson WorkForce WF-2760 setting is “EPSONXXXXXX” (X: Last 6 digits of the MAC address). To change the Epson WorkForce WF-2760 printer name, retype the text.
Epson WorkForce WF-2760 Set TCP/IP Setup settings.
  • Normally, the broadband router or access point will automatically allocate an IP address to the printer using the DHCP function. If your router (or access point) DHCP function is on, select Auto.
Note:
To assign a unique IP address to the printer, select Manual, and enter the IP Address, Subnet Mask and Default Gateway.
  • Epson WorkForce WF-2760 Set the DNS server. DNS server and proxy server settings are not available for all printers or may not be enabled.
  • Normally, the broadband router or access point will automatically allocate a DNS server address to the printer. To use this option, select Auto.
Note:
To specify the DNS server address, select Manual, and enter the Primary DNS Server and Secondary DNS Server addresses.
  • Set the proxy server address.
  • Select Do Not Use.
Note:
To use the proxy server, select Use, and enter the Proxy Server address and Port.

Epson WorkForce WF-2760 Printer Review

The Epson's ADF is slow. Making a five-page black-and-white copy using the ADF took 1 minute, 27 seconds. By comparison, the Bro MFC-J985DW, which was slower at making solitary copies, made a five-page copy using its ADF in 1:08.

The WF-2760 is much faster compared to most tested models at making a shade copy. This Epson all-in-one made a color copy in 28.1 secs, or 2.1 ppm. The Bro MFC-J985DW was quickest in this test, at 20.3 seconds (or 3 ppm). Remarkably, the WF-2760 got the pace when feeding color records through the ADF, making five-page copies at 3.3 ppm. It made a two-sided color copy of a six-page document in 3:16. The WF-2760 was 3 secs much faster than the 14.3-second average for inkjets at making black-and-white scans. It checked at 300 dpi to PDF style in 11.3 secs. The quickest version, the HP Envy 5540, took 9.7 seconds.

High-resolution color scanning was slightly slower than the standard of 1:17. The Epson WF-2760 took 1:21 to make a 600 dpi JPEG, which was 10 secs much faster than the HP Envy 5540, however well behind the Canon Pixma MG3620 (39.4 secs) and also the Sibling MFC-J985DW (40.7 seconds).

Print top quality from the WF-2760 was high across the board. Text festinated and dark on simple paper. On top notch paper, the inkjet's outcome matched that of a printer, with razor-sharp edges and sleeker letter forms. That additionally applied of records that combined text and shade graphics. Publish top quality was great on plain paper, as well as on top quality paper, message looked sleeker and also sharper while textures in graphics looked smoother and fine details were a little sharper. When making use of the WF-2760's duplexer to earn two-sided prints, shade graphics looked somewhat lighter compared to one-sided printouts. Shades of black did not look as deep as well as dark. Text also did not print quite as dark.

You might also Like:


Subscribe to receive free email updates:

0 Response to "Epson WorkForce WF-2760 Wireless Printer Setup"