Epson ET-2700 Wireless Printer Setup & Drivers



Epson ET-2700 Wireless Printer Setup & Drivers and Review

Setting up a Epson ET-2700 Printer Wi-Fi Network Using the Control Panel

You can set up a Wi-Fi network for Epson ET-2700 printer by using the Epson ET-2700 printer’s control panel.

Using the Epson ET-2700 Wi-Fi Setup Wizard with LCD panel

If Epson ET-2700 printer has an LCD panel, you can use the Epson ET-2700 Wi-Fi Setup Wizard to simplify manual setup.
Note:
  1. Epson ET-2700 Wifi Setup is not offered for all Epson printers or might not be made it possible for.
  2. Make certain that the Wi-Fi is made it possible for on your computer system beforehand.
  3. Check the SSID and password for your network as these are needed throughout Wi-Fi setup. If you do unknown the SSID and password, check with your network administrator.
  4. For step by step details on Epson ET-2700 Setup a Wi-Fi connection utilizing the Wi-Fi Setup Wizard,See below for more Setup. This function is not offered for all printers or might not be made it possible for.



Select your SSID. The SSID is the name of your Wi-Fi network (for example, "My_home's WiFi").
The list is sorted by signal strength.
Select your Wi-Fi Network (SSID), & then press OK. Select Next to continue.

Select the (LINK) What is SSID? if you do not know your SSID.

Enter the password (passphrase or WEP key) for your SSID.
This screen is a virtual keyboard. Use the arrow keys on the control panel to select each character and press OK to enter each character in your password. Select DONE & then press OK to confirm.

IMPORTANT: The Security Key is case sensitive.
Your security key may contain uppercase & lowercase letters as well as numbers.


Select Next to continue.

Using the virtual keyboard
 ↔ Changes to upper case, lower case, or symbols.

 ↔ Moves the cursor to the left and right.

↔ Deletes a character to the left of the cursor (Backspace).

 ↔ Enters a space.

↔Finishes entering characters on the virtual keyboard.



Check the information on the screen shown above. If everything is correct, press OK. The Password is hidden for security purposes.
If you want to check this information again, press .

If this screen is displayed, select Yes, & then Select OK. Select Next to continue.

It may take a few minutes while the Epson ET-2700 printer connects to the network.Select Next to continue.
When this screen is displayed, the Epson ET-2700 Wi-Fi setup is complete. Select No, & then press OK to finish Epson ET-2700 Wi-Fi setup. If you want to Epson ET-2700 print a network connection check report, load plain paper in the Epson ET-2700 printer, select Yes, & then press OK. For details on loading paper, see your documentation. Select Next to continue.


Press to return to the Home screen.

Make sure one of the following Wi-Fi status icons is displayed in the upper-right corner of the LCD screen.


(Infrastructure mode), (Ad Hoc mode)
It may take a few minutes for the icon to be displayed.

To use the Epson ET-2700 printer via Wi-Fi you need to make sure that a Epson ET-2700 Wi-Fi connection is setup on your computer/PC/Dekstop/Laptop/notebook.

Epson ET-2700 Wifi Printer Setup and Review

Enter WPS Push Button Epson ET-2700 Setup Wizard

The printer supports the WPS push button technique and the WPS PIN code approach.

Prior to connecting the printer to the network, check that the access point supports the WPS function.

Note:
  • Make sure that the Wi-Fi is made it possible for on your computer beforehand.
  • For information on the gain access to point WPS function or troubleshooting, see the gain access to point's user's guide.
  • If the access point (wireless router) is not found within approximately 2 minutes, an error message is shown. In that case, make sure the gain access to point is running, & then make the Epson ET-2700 WPS settings again from the beginning.
  • For step by step information on establishing a Wi-Fi connection using the Epson ET-2700 WPS setup, Select the following link. This function is not available for all Epson ET-2700 Wifi printers or might not be made it possible for.
Hpw to Enter WPS Push Button Setup Wizard for Epson ET-2700 printerEpson ET-2700 Enter WPS Push Button Setup Wizard
If your router (access point) is compatible with WPS, press the WPS push button on the router (access point), or if there is no button on the router, Select the button in your router software settings utility, and then press ok. Select Next to continue.
  If this screen is displayed, select Yes, & then Select OK. Select Next to continue.
 It may take a few minutes while the Epson ET-2700 printer connects to the network. Select Next to continue.

When this screen is displayed, the Epson ET-2700 Wi-Fi setup is complete. Press OK to finish Epson ET-2700 Wi-Fi setup. Select Next to continue.
If a Warning screen is displayed, Epson ET-2700 Wi-Fi setup failed.
Press OK & then try Epson ET-2700 WPS setup again from step 2.

Check the following items.  
  1. Check that the access point is turned on. If it is turned off, turn it on & then perform Epson ET-2700 network setup again.
  2. Place your Epson ET-2700 printer close to the access point.
  3. Check that the Wi-Fi communication mode (IEEE802.11*) set for your access point matches the one supported by Epson ET-2700 printer. (*Display varies according to your location.)
  4. If the MAC address filtering function is enabled, register your printer's MAC address to prevent Epson ET-2700 printer from being filtered.
  5. Check whether or not the DHCP function for the access point is enabled. If it is disabled, change it to enabled.
Press ↑ to return to the Home screen.
Make sure the following Epson ET-2700 Wi-Fi status icon is displayed in the upper-right corner of the LCD screen. It may take a few minutes for the icon to be displayed.

To use the Epson ET-2700 printer via Wi-Fi you need to make sure that a Epson ET-2700 Wi-Fi connection is setup on your compute




Epson ET-2700 Enter WPS Pin Code Setup Wizard 


Using the router's setting utility on your computer/PC/Laptop/Dekstop/Notebook, enter the WPS PIN code that is displayed on the Epson ET-2700 printer's LCD panel into your router (access point), & then press OK. Select Next to continue. 

If this screen is displayed, select Yes, & then press OK. Select Next to continue.
It may take a few minutes while the Epson ET-2700 printer connects to the network. Select Next to continue.

When this screen is displayed, the Epson ET-2700 Wi-Fi setup is complete. Press OK to finish Wi-Fi setup. Select Next to continue.
If the following screen or a Warning screen is displayed, Epson ET-2700 Wi-Fi setup failed.

Select OK & then try Epson ET-2700 WPS setup again from step 2.


Check the following items.
  1. Examine that the PIN code is gotten in correctly in the access point energy.
  2. Check that the gain access to point is switched on. If it is turned off, turn it on and after that carry out network setup once again.
  3. Position your printer near to the gain access to point.
  4. Examine that the Wi-Fi communication mode (IEEE802.11 *) set for your gain access to point matches the one supported by your printer. (* Show varies according to your area.).
  5. If the MAC address filtering function is enabled, register your printer's MAC address to prevent your printer from being filtered.
  6. Inspect whether or not the DHCP function for the access point is allowed. If it is handicapped, alter it to made it possible for.

Press ↑ to go back to the Home screen.
Make certain the following Epson ET-2700 Wi-Fi status icon is shown in the upper-right corner of the LCD screen. It might take a few minutes for the icon to be displayed.

 Making General Network Settings with LCD panel

You can Epson ET-2700 set up general network settings for your Epson ET-2700 printer using the Epson ET-2700 printer’s control panel.
Note:
This feature is not available for all Epson printers or may not be enabled.
This Epson ET-2700 setting, and the DNS server/Proxy server address setting, is not available for all Epsn printers or may not be enabled.
  • Turn on the Epson ET-2700 printer.
  • Enter the Epson ET-2700 Setup mode.
  • Select Epson ET-2700 Network Settings (or Epson ET-2700 Wi-Fi Settings).
  • Select General Epson ET-2700 Network Setup (or Epson ET-2700 Manual Wi-Fi Setup).
  • Confirm the Epson ET-2700 printer name and modify it if you want.
  • The Epson ET-2700 printer name is used to access or identify the Epson ET-2700  printer on the network.
Note:
The default Epson ET-2700 setting is “EPSONXXXXXX” (X: Last 6 digits of the MAC address). To change the Epson ET-2700 printer name, retype the text.
Epson ET-2700 Set TCP/IP Setup settings.
  • Normally, the broadband router or access point will automatically allocate an IP address to the printer using the DHCP function. If your router (or access point) DHCP function is on, select Auto.
Note:
To assign a unique IP address to the printer, select Manual, and enter the IP Address, Subnet Mask and Default Gateway.
  • Epson ET-2700 Set the DNS server. DNS server and proxy server settings are not available for all printers or may not be enabled.
  • Normally, the broadband router or access point will automatically allocate a DNS server address to the printer. To use this option, select Auto.
Note:
To specify the DNS server address, select Manual, and enter the Primary DNS Server and Secondary DNS Server addresses.
  • Set the proxy server address.
  • Select Do Not Use.
Note:
To use the proxy server, select Use, and enter the Proxy Server address and Port.

Epson ET-2700 Printer Review

Meet Epson's next generation of EcoTank. This 3-in-1 inkjet with Wi-Fi is easy to use and also has three years' well worth of ink included1.

When life is demanding, you need an ultra-low-cost printer that could care for itself. With Epson's cartridge-free EcoTank, you obtain three years' worth of ink included1-- that means minimal refills and also no extra ink prices. A suitable option for busy homes, this dependable and also user friendly version includes a boosted ink filling system and also brand-new ink bottles syntheticed for mess-free refills.

Cartridge-free printing
Go much longer between refills with EcoTank. It utilizes ultra-high-capacity ink storage tanks to totally get rid of the need for cartridges. In fact, it includes the matching of 95 cartridges well worth of ink2.

Ultra-low expense

3 whole years1-- that's the length of time you might do without purchasing even more ink for the ET-2700. Providing you a very reduced cost-per-page, it generates an excellent 7,500 pages in black and also 6,000 in colour3.

Discover the future generation of EcoTank

With the ink container currently housed at the front, EcoTank is extra portable and less complicated to use compared to before. Shielding you versus leakages as well as spills, it showcases an enhanced ink loading system crafted for mess-free refills. The new containers also integrate a mechanism to make certain that just the right colours are inserted. Thanks to the front ink degree screen, it's now very easy to see when it's finally due for a refill. And with pigment black as well as color colour inks, it generates prints with crisp, clear text and also dazzling colours.

Print from practically anywhere

With Wi-Fi and Wi-Fi Direct, you could send papers to print from smart tools using the Epson iPrint4 application. It can also obtain data from virtually anywhere in the world through Epson Email Print4.

Satisfaction

With a Micro Piezo printhead, EcoTank provides a trusted printing solution which is backed by a 3 year service warranty (upon registration).

Trick Features

  • 3 years' well worth of ink1: Equivalent of 95 cartridges worth of ink included2
  • Ultra-low-cost printing: Publish up to 7,500 web pages in black as well as 6,000 web pages in colour3
  • Future generation ink filling up system: Take pleasure in inconvenience and also mess-free refills with the improved ink containers
  • Wi-Fi & apps: Print from mobile phones
  • 3-in-1 with front loading storage tank: Publish, copy & check


You might also like:
How to download Epson ET-2700 drivers


Subscribe to receive free email updates:

0 Response to "Epson ET-2700 Wireless Printer Setup & Drivers"