Epson AcuLaser C1100 Wireless Printer Setup



Epson AcuLaser C1100 Wireless Printer Setup and Review

Setting up a Epson AcuLaser C1100 Printer Wi-Fi Network Using the Control Panel

You can set up a Wi-Fi network for Epson AcuLaser C1100 printer by using the Epson AcuLaser C1100 printer’s control panel.

Using the Epson AcuLaser C1100 Wi-Fi Setup Wizard with LCD panel

If Epson AcuLaser C1100 printer has an LCD panel, you can use the Epson AcuLaser C1100 Wi-Fi Setup Wizard to simplify manual setup.
Note:
  1. Epson AcuLaser C1100 Wifi Setup is not offered for all Epson printers or might not be made it possible for.
  2. Make certain that the Wi-Fi is made it possible for on your computer system beforehand.
  3. Check the SSID and password for your network as these are needed throughout Wi-Fi setup. If you do unknown the SSID and password, check with your network administrator.
  4. For step by step details on Epson AcuLaser C1100 Setup a Wi-Fi connection utilizing the Wi-Fi Setup Wizard,See below for more Setup. This function is not offered for all printers or might not be made it possible for.



Select your SSID. The SSID is the name of your Wi-Fi network (for example, "My_home's WiFi").
The list is sorted by signal strength.
Select your Wi-Fi Network (SSID), & then press OK. Select Next to continue.

Select the (LINK) What is SSID? if you do not know your SSID.

Enter the password (passphrase or WEP key) for your SSID.
This screen is a virtual keyboard. Use the arrow keys on the control panel to select each character and press OK to enter each character in your password. Select DONE & then press OK to confirm.

IMPORTANT: The Security Key is case sensitive.
Your security key may contain uppercase & lowercase letters as well as numbers.


Select Next to continue.

Using the virtual keyboard
 ↔ Changes to upper case, lower case, or symbols.

 ↔ Moves the cursor to the left and right.

↔ Deletes a character to the left of the cursor (Backspace).

 ↔ Enters a space.

↔Finishes entering characters on the virtual keyboard.



Check the information on the screen shown above. If everything is correct, press OK. The Password is hidden for security purposes.
If you want to check this information again, press .

If this screen is displayed, select Yes, & then Select OK. Select Next to continue.

It may take a few minutes while the Epson AcuLaser C1100 printer connects to the network.Select Next to continue.
When this screen is displayed, the Epson AcuLaser C1100 Wi-Fi setup is complete. Select No, & then press OK to finish Epson AcuLaser C1100 Wi-Fi setup. If you want to Epson AcuLaser C1100 print a network connection check report, load plain paper in the Epson AcuLaser C1100 printer, select Yes, & then press OK. For details on loading paper, see your documentation. Select Next to continue.


Press to return to the Home screen.

Make sure one of the following Wi-Fi status icons is displayed in the upper-right corner of the LCD screen.


(Infrastructure mode), (Ad Hoc mode)
It may take a few minutes for the icon to be displayed.

To use the Epson AcuLaser C1100 printer via Wi-Fi you need to make sure that a Epson AcuLaser C1100 Wi-Fi connection is setup on your computer/PC/Dekstop/Laptop/notebook.

Epson AcuLaser C1100 Wifi Printer Setup and Review

Enter WPS Push Button Epson AcuLaser C1100 Setup Wizard

The printer supports the WPS push button technique and the WPS PIN code approach.

Prior to connecting the printer to the network, check that the access point supports the WPS function.

Note:
  • Make sure that the Wi-Fi is made it possible for on your computer beforehand.
  • For information on the gain access to point WPS function or troubleshooting, see the gain access to point's user's guide.
  • If the access point (wireless router) is not found within approximately 2 minutes, an error message is shown. In that case, make sure the gain access to point is running, & then make the Epson AcuLaser C1100 WPS settings again from the beginning.
  • For step by step information on establishing a Wi-Fi connection using the Epson AcuLaser C1100 WPS setup, Select the following link. This function is not available for all Epson AcuLaser C1100 Wifi printers or might not be made it possible for.
Hpw to Enter WPS Push Button Setup Wizard for Epson AcuLaser C1100 printerEpson AcuLaser C1100 Enter WPS Push Button Setup Wizard
If your router (access point) is compatible with WPS, press the WPS push button on the router (access point), or if there is no button on the router, Select the button in your router software settings utility, and then press ok. Select Next to continue.
  If this screen is displayed, select Yes, & then Select OK. Select Next to continue.
 It may take a few minutes while the Epson AcuLaser C1100 printer connects to the network. Select Next to continue.

When this screen is displayed, the Epson AcuLaser C1100 Wi-Fi setup is complete. Press OK to finish Epson AcuLaser C1100 Wi-Fi setup. Select Next to continue.
If a Warning screen is displayed, Epson AcuLaser C1100 Wi-Fi setup failed.
Press OK & then try Epson AcuLaser C1100 WPS setup again from step 2.

Check the following items.  
  1. Check that the access point is turned on. If it is turned off, turn it on & then perform Epson AcuLaser C1100 network setup again.
  2. Place your Epson AcuLaser C1100 printer close to the access point.
  3. Check that the Wi-Fi communication mode (IEEE802.11*) set for your access point matches the one supported by Epson AcuLaser C1100 printer. (*Display varies according to your location.)
  4. If the MAC address filtering function is enabled, register your printer's MAC address to prevent Epson AcuLaser C1100 printer from being filtered.
  5. Check whether or not the DHCP function for the access point is enabled. If it is disabled, change it to enabled.
Press ↑ to return to the Home screen.
Make sure the following Epson AcuLaser C1100 Wi-Fi status icon is displayed in the upper-right corner of the LCD screen. It may take a few minutes for the icon to be displayed.

To use the Epson AcuLaser C1100 printer via Wi-Fi you need to make sure that a Epson AcuLaser C1100 Wi-Fi connection is setup on your compute




Epson AcuLaser C1100 Enter WPS Pin Code Setup Wizard 


Using the router's setting utility on your computer/PC/Laptop/Dekstop/Notebook, enter the WPS PIN code that is displayed on the Epson AcuLaser C1100 printer's LCD panel into your router (access point), & then press OK. Select Next to continue. 

If this screen is displayed, select Yes, & then press OK. Select Next to continue.
It may take a few minutes while the Epson AcuLaser C1100 printer connects to the network. Select Next to continue.

When this screen is displayed, the Epson AcuLaser C1100 Wi-Fi setup is complete. Press OK to finish Wi-Fi setup. Select Next to continue.
If the following screen or a Warning screen is displayed, Epson AcuLaser C1100 Wi-Fi setup failed.

Select OK & then try Epson AcuLaser C1100 WPS setup again from step 2.


Check the following items.
  1. Examine that the PIN code is gotten in correctly in the access point energy.
  2. Check that the gain access to point is switched on. If it is turned off, turn it on and after that carry out network setup once again.
  3. Position your printer near to the gain access to point.
  4. Examine that the Wi-Fi communication mode (IEEE802.11 *) set for your gain access to point matches the one supported by your printer. (* Show varies according to your area.).
  5. If the MAC address filtering function is enabled, register your printer's MAC address to prevent your printer from being filtered.
  6. Inspect whether or not the DHCP function for the access point is allowed. If it is handicapped, alter it to made it possible for.

Press ↑ to go back to the Home screen.
Make certain the following Epson AcuLaser C1100 Wi-Fi status icon is shown in the upper-right corner of the LCD screen. It might take a few minutes for the icon to be displayed.

 Making General Network Settings with LCD panel

You can Epson AcuLaser C1100 set up general network settings for your Epson AcuLaser C1100 printer using the Epson AcuLaser C1100 printer’s control panel.
Note:
This feature is not available for all Epson printers or may not be enabled.
This Epson AcuLaser C1100 setting, and the DNS server/Proxy server address setting, is not available for all Epsn printers or may not be enabled.
  • Turn on the Epson AcuLaser C1100 printer.
  • Enter the Epson AcuLaser C1100 Setup mode.
  • Select Epson AcuLaser C1100 Network Settings (or Epson AcuLaser C1100 Wi-Fi Settings).
  • Select General Epson AcuLaser C1100 Network Setup (or Epson AcuLaser C1100 Manual Wi-Fi Setup).
  • Confirm the Epson AcuLaser C1100 printer name and modify it if you want.
  • The Epson AcuLaser C1100 printer name is used to access or identify the Epson AcuLaser C1100  printer on the network.
Note:
The default Epson AcuLaser C1100 setting is “EPSONXXXXXX” (X: Last 6 digits of the MAC address). To change the Epson AcuLaser C1100 printer name, retype the text.
Epson AcuLaser C1100 Set TCP/IP Setup settings.
  • Normally, the broadband router or access point will automatically allocate an IP address to the printer using the DHCP function. If your router (or access point) DHCP function is on, select Auto.
Note:
To assign a unique IP address to the printer, select Manual, and enter the IP Address, Subnet Mask and Default Gateway.
  • Epson AcuLaser C1100 Set the DNS server. DNS server and proxy server settings are not available for all printers or may not be enabled.
  • Normally, the broadband router or access point will automatically allocate a DNS server address to the printer. To use this option, select Auto.
Note:
To specify the DNS server address, select Manual, and enter the Primary DNS Server and Secondary DNS Server addresses.
  • Set the proxy server address.
  • Select Do Not Use.
Note:
To use the proxy server, select Use, and enter the Proxy Server address and Port.

Epson AcuLaser C1100 Printer Review

Out of the box the Epson Aculaser C1100 excites, with solid construct high quality as well as styled looks. Yet the breadbin style offers the Epson Aculaser C1100 a larger than ordinary footprint, as well as prospective buyers will certainly need to give up more desk area compared to they might intend to. And also while connection options are pretty standard, the Epson Aculaser C1100 design does not support Ethernet.

The Epson Aculaser C1100's monochrome print performance is crisp, with a near immediate time-to-print and also a constant throughput of 17ppm (pages each min). This isn't really rather as quick as is priced estimate, yet it suffices for everyday workplace usage. Colour efficiency is unsatisfactory, nonetheless. Time to print is just 15 seconds, but the Epson Aculaser C1100's colour engine isn't with the ability of more than 5ppm.

For a single colour web page, this rapid time-to-print suggests the Epson Aculaser C1100 wins on rate. On longer print runs the Epson Aculaser C1100 drops behind the competition. Running expenses get on the high side, with 10.5 cents each web page for the low ability toner option as well as 3.6 cents per web page for highcapacity cartridges.

The biggest win for the Epson Aculaser C1100 is print quality, which is impressive. All-natural colour equilibrium and great complexion, incorporated with lots of colour punch.


Subscribe to receive free email updates:

0 Response to "Epson AcuLaser C1100 Wireless Printer Setup"